Unlock iPhone, Jailbreak iPhone and iPhone Unlocking

ZiPhone 2.0 !!! (game over!)

2/13/2008 07:53:00 PM - 319 comments
ZiPhone v2.0 is finally OUT.
In the command line version, you will find a new
option "-b" be very careful with that!
I take no responsability if you brick your phone!
ZiPhone -b will downgrade bootloader from 4.6 to 3.9,
flash 4.03.13_G baseband version and
unlock it (in one shot!).
It worked for me on 2 ootb 1.1.2 phones.
It will work on 1.1.3 ootb phones too.
Other options are unchanged.
Do not forget to donate!
The future of ZiPhone will depend on you also !
If you can't code, or contribute in other ways,
just donate.
I think we won't need another version till the next firmware release :)
Namaste!
Peace out.
(To quote my favourite blogger)

Important:
For people who get stuck on apple logo.
Try to use: ZiPhone -v -b
That solved the problem for many people.

319 Responses

«Oldest   ‹Older   1 – 200 of 319   Newer›   Newest»

That was fast! Your the Man!

lol I had just said to a friend "ZiPhone 2.0 is coming out soon". Then I refreshed. And there it was! :P

Dling now.

Just to ask a simple question, ziphone v2 unlocks all iphones now?

cheers

(donated)

no wonder the old links don't work anymore. cheers to you!

The read me and about info is saying version 1.0. Is that right?

I get stuck at the apple logo screen and the command prompt says
Please wait 45".

what am I doing wrong ?

Hi Zibri,

Cptn Corneta again. I really like what you're doing. And I appreciate it.

About the new bootloader downgrade option, as I understand it, geohot is working on a modified 4.6 bootloader, which has a patched seczone and is 'unlocked' by default. It seems however that it will only work on bootloader 4.6 and not on 3.9; on the assumption that it will ever be released, or that an entirely opensource replacement bootloader is released, will be able to just re-upgrade the already downgraded 3.9 bootloader (or for people with the original 3.9 BL on their iPhones) to this new bootloader?

There is something else that is a little bit striking for me. On the past you said that you didn't want anyone's money, and that you wouldn't take donations and even pointed the finger over those who did. But now, after the insistence of people on your blog, you setup a paypal account and now you are even encouraging everyone to donate. Isn't this a little double standard? Please don't get me wrong on this as I am not attacking you, I just want to know if you changed your position entirely or something else happened?

Best regards and keep up the good work.

does 2.0 let us use Ibrickr?

Zibri, what method does Ziphone use to unlock BL 3.9 iPhones?

Is it similar to anySIM 1.1.3? or Geohot's unlock?

YOU! Ziphone 1.0 crasched my phone, BUT 2,0 saved it.

NICE!

I just unlocked 2 iPhones using the new method, thanks!

you still didn't fix the bug where people get stuck at the apple logo

quick update though good job

Hey Frank, I am newbie to this, I have a 16gb iphone still in the box. Can you detail out some instructions? or just plug in the phone and follow instructions.?

Umm... can anyone tell me to use ziPhone on a mac? I'm running Leopard and really want to use it... and can't seem to find the "mac version". Thanks in advanve

First of all thanks a lot for your effort and help all the iPhone community.

I just want you to ask about don't forget people with 3.9 bootloader and have bad imei, and to upgrade to 1.1.3 didn't be useful.

A lot of people like me still with a brick iphone and don't know what to do... So please don't forget us, we need your help.

Thanks again for what Geohotz and you have done.

Stuck on the Apple Logo....
Tested on 2 Phones, 3 versions, same results..Any Ideas?

this is great news all!

if i wanted to upgrade..
so if i have a 1.0.2 unlocked phone, do i have to manually install 1.1.3 restore image?

then run ziphone2.0?

In the past i believed in teams.
I thought my ideas could be used for good and for release.
The i realized that they were asking for money and keeping things for theirselves.

Now I am on my own.
Relying on the help of a few friends and trying to put together a working product.

I got nothing in the past.. only insults (and more will surely come).

Every tool out so far (iphuc included) is based on the work of others.

And everybody is free to choose a tool to use.

I just said, if you think ZiPhone is useful, USE IT... and thank me.

I spent the last week no-stop working on this.

And I am not asking for anything.
If someone feels to donate he can.
I have been asked by many... so I put the donate button.

Now stop dramas and blaggers.

Namaste :)

Thanks Zibri! Great works!
One simple question from beginner:
Does an 1.0.2 unlocked iphone need "Virginize" first before upgrading to 1.1.2 or 1.1.3 and then Ziphone?

Thanks!

Zibri, what method does Ziphone use to unlock BL 3.9 iPhones?

Is it similar to anySIM 1.1.3? or Geohot's unlock?

(same question as justin)

This comment has been removed by the author.

Zibri you are wery quick :)
anyway - thanks

Mate while I was in MMi, I have always favored your work and promoted the first patched anySIM in ALL my guides.

Keep up the great work!

Namaste :o)

I'm stuck with the apple logo, running ziphone stops at Searching for iphone... and nothing happens. I have restored in iTunes to 1.1.3 (I have a 1.1.2 OTB). Did I miss anything?

zibri, you are legend.


now, how to upgrade from 1.0.2? help!

hey zibri, r u indian?

Mate while being on the ModMyiFone band wagon, I've always supported your work in ALL my guides from the time you patched the first anySIM1-1.

Cheers and Namaste to you :o)

Could anyone please outline in detail for the non technically adept writer how to use this software on a MBP with OSX 10.4.2 to unlock my iphone? I believe my iphone has the 1.1.3 version software. Thank you.

Could you make a IMEI changer for the 3.9BL. Thanks

hey zibri, r u indian?

When you run this app, do you continue to run itunes? Or do you shut it down along with any services that are running. ALso do you need a certain version of itunes?

@bas:
ZiPhone 2.0 uses the exploit found by geohot but it flashes the original 3.9 bootloader not a patched one.
I thought that was much safer.

1.0.2 Phone should need to be virginized only if you used the fisr iunlock to unlock them (the one that fucked many phones thanks to "dev team" and that iPhone-Elite fixed with virginizer thanks to Fred_ and a few others.

iPhone crashes at applelogo, anyone know how to fix?

@ernest:

Yes, it's recommended that you Virginize before you upgrade.

Nevertheless, I'm unaware whether with Zibree's method you need to Virginize or not.

i hav downloaded the 2.0 but its not runing i get a message "this application has failed to strart because the application confrigation is incorrect.reinstaling the application may fix the problem"....i am using a windows xp and i dont hav itunes ...so what the problem any help guys...

i hav downloaded the 2.0 but its not runing i get a message "this application has failed to strart because the application confrigation is incorrect.reinstaling the application may fix the problem"....i am using a windows xp and i dont hav itunes ...so what the problem any help guys...

take a break man you deserve it! keep the good work on 1.1.4 and beyond! you are already a legacy in history of iphone and internet today.

anyone gonna write a wiki post for Zibri and Ziphone?

zibri, do we need to restore?

i hv 1.1.2OOTB with gunlock solution, so now i hv 1.1.3

do i need to restore ? or just run ziphone?

tkz my friend.. i will donate again

thanks that's what I wanted to know :) keep up the good work, cheers

doesn't the 1.1.3 fix the broken imei of the gay dev team?

1.0.2 UNLOCKED -> restore 1.1.3 -> Ziphone

work?

@Evaristo

Try putting your phone into Recovery Mode manually. The best practice is to hold the Power + Home button till the time it takes you to the Recovery Screen. Your phone will boot twice while your holding the two buttons at once.

P.S. Use iTunes 7.5

When using ZiPhone, do I have to

1. Keep iTunes running or disconnect iPhone from iTunes? Since it's automatically brought up when iPhone is connected.

2. When ZiPhone says "Entering recovery mode", does that mean I have to manually do it now or ZiPhone has done it for me?

Kinda confusing and I managed to brick my iPhone now with ZiPhone 2.0, which has never happened to me no matter how I upgrade/downgrade from 1.0.2, 1.1.1 to 1.1.2.

I'd be great to have all these clarified, wouldn't it?

Also stucked at the applelogo, any solutions for that?

hey,

looks great, but whats the story with a mac version?

thanks

Bravo zibri, fai bene a prendertela con chi diceva che non era vero che avresti sbloccato.
Neanche aggiorno la guida che ho fatto che rilasci una nuova versione lol.
c'è un unico problema, molti gli si blocca l'iphone alla mela, e dopo l'unica cosa che possono fare e ripristinare il firmware.

hey,

looks great,, whats the story with the mac version though??

thanks

OK LET ME HELP YOU GUYS OUT
I KNOW HOW FRUSTRATING THIS IS I HAD TO CAPE WITH IT MY SELF FOR 2 DAYS AND WENT TRHOUG 15 RESTORES AND I FINALLY GOT IT.

FIRST OF ALL ZIPHONE 1.2 WILL WORK WITH BOTH BOOTLOADERS. DISREGARD THAT ITS VERSION 1.0 IN THE README FILE

IF YOU GET STUCK WITH THE APPLE LOGO, HOLD BOTH POWER AND HOME BUTTONS FOR 30 SECONDS WITH YOUR PHONE DOCKED. DO A RESTORE IN ITUNES TO 1.1.3 (NO SHIFT KEY)

SO IN OTHER WORDS WHAT YOU NEED IS
1. PHONE IN 1.1.3
2. HAVE .NET FRAMEWORK 2 INSTALLED
DOWNLOAD IT FROM MICROSOFT WEBSITE)
3. ZIPHONE 1.2 MAKE SURE ITS EXTRACTED TO YOUR C DRIVE (C:\ZIPHONE)
4. ITUNES 7.5 AND 7.5 ONLY (IT DIDNT WORK FOR ME IN 7.4 OR 7.6)

THE GUI TENDS NOT TO WORK SO WE WILL USE THE COMMAND LINE

CLICK START RUN CMD

TYPE CD\
YOU SHOULD SEE C:\
TYPE CD ZIPHONE
TYPE ZIPHONE AND WHATEVER LETTER CORRESPONDS TO THE DESIRED ACTION (J A U) BUT PUT -V AT THE END (THIS WILL WORK AND GET YOU PASSED THE APPLE LOGO)

KEEP WATCHING YOUR PHONE AND THAT SHOULD DO IT.
GOOD LUCK GUYS

When I say stuck at apple logo I mean that ziphone does not go any further than Searching for iPhone and iTunes does not find the iPhone anymore. Will it help if I run ziphone -b -v? What is the risk if I do that? Any other solution apart from downgrading the bootloader?

Dear Z !

i appreciate the new versions ... but we will more happy if you fix the "Freeze apple logo" bug ...

thanks in advance

So is the unlock for 3.9 BL phones upgrade/restore resistant if a new firmware with new baseband firmware is released?

Thanks for the fast updates Z good work,

One question, is the 2.0 update for only the PC version, the mac version seems to do the exact same thing it was doing on 1.1, stuck at "Please wait 45"" and the apple logo. Need to restore my brick for the 6th time now.

Just wanted to say thanks. I've been following this for a while now.
I'm not concerned with all the "happenings" between teams and individuals since nobody else really knows what's happened but you. and it's your right to keep things to yourself if you want.

You've done an awesome job and good on you for continuing on and keeping us up to date!! Thousands and thousands of people are benefiting from you and Geo.

I hope that you'll be able to keep going and possibly work even closer with geo.
-> does this mean no 4.03 on 4.6? *tear* not sure if I want to jump on the downgrade BL bandwagon quite yet.
Don't listen to the people who hate on what your doing, take the positive and run with it.

again, Many thanks.

and. ppl running into issues. -> he's mentioned it before. but there are forums to get help. his blog isn't a help desk. http://hackint0sh.org/ would be a good place to get some help.

-> A Canadian that's quite pleased with your work.

Zibri It looks great, but I have the same issue on all my phones, and I have tested 3 versions.
The Jailbreak & Activation Fail because the phone gets stuck at the apple logo after restarting...

I've seen others are having this problem and thought I would ask you what the problem might be?

Right now I have gone back to doing them the long manual way.

Zibri whatsup bro? I dl'ed ur app... did u forget to put 2.0 in the about? and also, when upgraded from a 3.9BL otb to a 1.1.3, once running ZiPhone what boxes should be checked? Thanks a lot homie keep up the good work, were all extremely proud of you, and fuck that dude who said y r u asking for money all of a sudden, man, ur saving ppl hundreds, U DESERVE MUCH MORE!!

This comment has been removed by the author.

Zibri whatsup bro? I dl'ed ur app... did u forget to put 2.0 in the about? and also, when upgraded from a 3.9BL otb to a 1.1.3, once running ZiPhone what boxes should be checked? Thanks a lot homie keep up the good work, were all extremely proud of you, and fuck that dude who said y r u asking for money all of a sudden, man, ur saving ppl hundreds, U DESERVE MUCH MORE!!

i must thank you alot

very easy to activate, jailbreak and unlock new phones and with version 2 i managed to unbrick a iphone too

all the best

donation on the way

I have an iPhone 1.1.1 and tried to uso ZiPhone 2.0 (options jailbreakme and activate) and I'm getting a static apple logo... Am I doing something wrong?

Work great on 1.1.3 OTB with Vista thanks zibri and geo

About to paypal you for this work, it's awesome. I just need to know the format for changing the IMEI...ziphone -i 01234567890 (not the real number I am using) doesn't seem to work.
thanks!

@ZIBRI

ok i just did zphone 2.0 everything work perfect. but when you follow this tutorial and add appsupport something messes up. i followed this tutorial to a tee. i don't it twice and same result once you finish copy the files over and power down the phone to reboot and power up again. it's stuck on the imfamous white apple logo. i have to put in recovery mode restore 1.1.3 via itunes and run ziphone 2.0 again. so ziphone does not seem to be compatible with adding appsupport for unsupported country unless i did something wrong but i followed the tutorial word for word. still a few bugs!!! so if you live in a unsupported country i wouldn't try ziphone method. ANY IDEAS ZIBRI PLEASE.

ok i just did zphone 2.0 everything work perfect. but when you follow this tutorial and add appsupport something messes up. i followed this tutorial to a tee. i don't it twice and same result once you finish copy the files over and power down the phone to reboot and power up again. it's stuck on the imfamous white apple logo. i have to put in recovery mode restore 1.1.3 via itunes and run ziphone 2.0 again. so ziphone does not seem to be compatible with adding appsupport for unsupported country unless i did something wrong but i followed the tutorial word for word. still a few bugs!!! so if you live in a unsupported country i wouldn't try ziphone method.

Unfortunately it doesn't work :((

it "hangs" (nice logo) for several hours and nothing happens...

ZiPhone v2.0 by Zibri. http://zibree.blogspot.com
Source code available at: http://www.iphone-elite.org

Loading zibri.dat.
Searching for iPhone...
Entering recovery mode.
tp://zibree.blogspot.com
Source code available at: http://www.iphone-elite.org

Loading zibri.dat.
Searching for iPhone...
Working...
overy mode.
tp://zibree.blogspot.com
Source code available at: http://www.iphone-elite.org

Loading zibri.dat.
Searching for iPhone...
Please wait 2'30".
de.
tp://zibree.blogspot.com
Source code available at: http://www.iphone-elite.org

Loading zibri.dat.
Searching for iPhone...

any help on this?
thanks in advance

is there any reason for you not to tell people if 3.9BL phones get unlocked with anysim (or similar) or ipsf (or similar) method ?
i ask this cause if its ipsf like method, people will need to backup the same files they needed to backup with geos ipsf like method, i guess.

Awesome tool.
Just used iTunes to restore 1.1.3 and then unlocked/activated my 3.9BL iPhone with ZiPhone on leopard.

I was getting the freezing on apple logo, but using the -v seemed to make it work.

Zibri the GUI about/readme file still says its 1.0 not 2.0

and in the GUI un option says its only for 4.6 BL

Hi

Many Thanks for your great job !!!

Do you think it's possible to create ZipPhone how install AnySim 1.3 o, the Iphone?

Because I have an Iphone with the "No Wi-Fi" pb (I guess it's an Hardware pb ...) I am not alone with this pb ....

I have install the 1.1.3 (BL 3.9) and unlock with ZipPhone 1.1 but after I can't install AnySim with Installer because he need wifi to download AnySIM :(

Please save my ! I don't want downgrade my Iphone to 1.0.2 :(

Thanks In advance


Julien

Sorry for asking this again, but I'm a newb when it comes to these things, how do I use ZiPhone on OSX? (as i said before.. I'm using Leopard)

zibri
zphone does not work when you try to add appsupport for unsupported country. after you copy the files over and power down to reboot and the power up it's stuck with white apple logo. any ideas what do to do. i've done it twice with 2.0. i have to put in restore mode and restore via itunes to 1.1.3 and run 2.0 again. it unlocks everthing works but phone crashes when calling, need to add appsupport but cant. any thoughts?

is there any reason for you not to tell people if 3.9BL phones get unlocked with anysim (or similar) or ipsf (or similar) method ?
i ask this cause if its ipsf like method, people will need to backup the same files they needed to backup with geos ipsf like method, i guess.

also youtube doesn't work, what gives zibri?

About to paypal, just need the instructions for IMEI change.
ziphone -i 01234567890 (not the real numbers I am using) does not appear to work.
thx!

iPhone 1.0.2 Can't Jailbreak !
Show Apple Logo !

still youtube's brokne.. a lot of things don't work...

iPhone 1.0.2 Can't Jailbreak !
Show Logo Apple any hour !

FOR ALL PEOPLE with the APPLE LOGO BUG:

Just use ZiPhone -v (then the options you need)

Zibri
I downgrade bootloader 16gb iPhone using Geo method used original 3.9BL as you did. Later i used ziphone to Jailbreak and activate

I used anysim 1.3 to unlock. Zibri is the new method different than anysim 1.3 method. should i undo my unlock?
Advice please!!!

Zibri the GUI about/readme file still says its 1.0 not 2.0

and in the GUI un option says its only for 4.6 BL

I feel stupid. Can't do anything.
Can't download 2.0 from any page.
Have no idea how to put my phone back to work.
Got my 1.1.2 OTB, that was Jailbraked but never unlocked before, and now has no IMEI, no WiFi no nothing. Just itunes logo and cable.
Can not restore software using iTunes 7.5 nor 7.4. Get error 1011.
CAN ANYONE HELP ME PLEASE!!!!!?????
I've been two days without working nor sleeping and I have 24hs more before sending my phone to Apple.
ANY MANUAL OUT THERE?
THANK YOU ZIBRI!!!!!!

bootloader downgrade worked for me ! :D

Zibri, If I have 3.9BL but no baseband (bbupdater seems not to work for me), Can I use this program to restore mi baseband? Or maybe is a problem in a seczone of my bootloader? In that case, what should I do?

@shawn:

IMEI changer works on any version NOW !

@zero:

I was in the team that gave you the virginizer!
Do you really think I would use the ipsf method !??!

Thanks for your efforts, but I'm stuck in APPLE LOGO and nothing appends.

Can you please solve this on your next release, or something wrong?

@keet

in 1.1.3 you DO NOT need to patch appsupport.

The problem with "unsupported countries" and the phone options (phone, sms) is fixed.

I live in an unsupported country and in 1.1.3 everything works right off the bat.

ZiPhone use all best methods together:

geohot bootloader exploit (but not with a patched bootloader, but with the original!)

for unlocking 4.03 i use the same method of AnySim 1.3.

The SECZONE is never touched by ZiPhone in any way.

ZiPhone is SAFE.
(maybe the bootloader dowgrade can be riskier.. but never failed so far!)

I would just like to say thanks for such a great application - You have no idea how many countless hours you've saved me (my phone stopped working and somehow got bricked, until i used ZiPhone which fixed it, jailbroke, AND unlocked it in under 2 minutes. I'll be sure to donate!

I tried ziphone -v -a -j -u without success. I'm stuck on the apple logo. The phone does not switch off either. I get the following message:

ZiPhone v2.0 by Zibri. http://zibree.blogspot.com
Source code available at: http://www.iphone-elite.org

Loading zibri.dat.
i386
Searching for iPhone...

Before this I got the message saying it was working and I should wait 2min30. After more than 10 minutes I shut down the terminal and started again. any help will be appreciated

this is for the people who are stuck in the logo, it helpted me...

i had a 1.1.1 3.9, got stuck in the logo when trixing with the phone.

Uppgrade via Itunes to 1.1.3 and then: http://thedailymac.com/how-to-fix-repair-needed-on-the-iphone/

go from 1.1.1 to 1.1.2 (got a bad message in the end) after that run Ziphone 2.0 with u, a, j and verbose.

that did it for me.
Hope it works for you to.

Zibri

I have a 3.9BL, previously unlocked using IPSF
I was on 1.1.2 + DEV softupgraded to 1.1.3
This morning, I upgraded/restored iPhone in iTunes to 1.1.3 and did run ZiPhoneGUI, so got jailbroken and activated, but : NO SIGNAL

I have tried everything, did thigns over 3 times, no signal ... ???

thx for help

ZiPhone worked great for me with 1.2, except for the issue with file access. It seems like using this doesn't fully jailbreak everything. iPhoneList and iPhoneBrowser have no access, nor can i login using Term-VT100.

Does 2.0 fix this issue at all? Or is there a patch that can be applied via installer to get file access back?

Thanks Zibri & ReVan on the 1.0.2 issue!
Since my phone was unlocked by others that I have no idea how it was done, I'd better "virginize" it first, though my IMEI is fine and not those "0049xxx...".

******* SUCCESS * SUCCESS ********

@Zibri:

I just tried V2.0 on my brand new 16GByte iPhone with 1.1.3 OOTB and BL 4.6!

I was successfully able to:

a) (j)ailbreak
b) (a)ctivate
c) (u)nlock

the phone.

Then i tried the -b option of ZiPhonev 2.0 (together with -v to get some feeling what's going on). After barely 2 minutes the 4.6 bootloader was downgraded to 3.9, the modem fw upgraded to 04.03.13_G - and unlocked!

THIS IS THE ULTIMATE UNLOCK!

cu/

Sergeij

******* SUCCESS * SUCCESS ********

@Zibri:

I just tried V2.0 on my brand new 16GByte iPhone with 1.1.3 OOTB and BL 4.6!

I was successfully able to:

a) (j)ailbreak
b) (a)ctivate
c) (u)nlock

the phone.

Then i tried the -b option of ZiPhonev 2.0 (together with -v to get some feeling what's going on). After barely 2 minutes the 4.6 bootloader was downgraded to 3.9, the modem fw upgraded to 04.03.13_G - and unlocked!

THIS IS THE ULTIMATE UNLOCK!

cu/

Sergeij

How do I use this program on a mac? Can someone PLEASE help me on this?

will it work on itouches too?

hey im gonna buy a 16GB iphone next friday so how would i unlock jailbreak and activate my phone utta the box? is there any order i have to do it in?? e.g. a j u -v ??

thanks

after downrading from 4.6 to 3.9 (-v -b) audio dynamic stopped working. what i did wrong? help plz

Any1 plz fix osx version
stuck at apple logo every time

Could someone please give me detailed description on how to use this Ziphone 2 program on mac. I am new at this and only just started to jailbreak my iphone.
thanks

Ryan

Any Help is surely appreciated...!!!!!!!

hey im gonna buy a 16GB iphone next friday so how would i unlock jailbreak and activate my phone utta the box? is there any order i have to do it in?? e.g. a j u -v ??

thanks

Ok, nothing seems to work for me, here is my situation

I bought the iPhone the first week it was out, so I'm assuming it's 3.9BL

I'm running...
10.5.2 Intel
iTunes 4.6,
1.1.3 + AT&T Service

Version History Experience -

ZiPhone 1.0 - went through all the steps on iClarify - it rebooted after all that and it did not install "Installer.app"

ZiPhone 1.1 - Stuck on apple logo after following all steps

ZiPhone 1.2 - Stuck on apple logo after following all steps

ZiPhone 2.0 - Stuck on apple logo after following all steps

Recovery mode and restore through iTunes is the only way to fix the stuck apple logo for me.

Any help?

will ziphone work on itouch too?

Hi I want to unlock my iPhone. Can you tell me the procedure I need to do, do I need to open iTunes before unlock or just connecting the iPhone to pc and running the ziphoneGUI.exe will work or do I need to open iTunes and I need to run the ziphoneGUI.exe I am confused how to do this.. Please explain me. Thanks for your effort.

will ziphone 2.0 work on 1.1.3 new itouch?

OOB 1.1.2, restored 1.1.3 (Mac, iTunes 7.6, 10.5.1)

iPhone in recovery Mode, iTunes not running, ZiPhone v2.0:

./ziphone -a -j

Loading zibri.dat.
i386
Searching for iPhone...
Working...
Please wait 45".

Have only the Apple Logo since 30 Minutes...

No reaction on shutdown-button. Do I have to wait since battery goes low?

Ok, nothing seems to work for me, here is my situation

I bought the iPhone the first week it was out, so I'm assuming it's 3.9BL

I'm running...
10.5.2 Intel
iTunes 4.6,
1.1.3 + AT&T Service

Version History Experience -

ZiPhone 1.0 - went through all the steps on iClarify - it rebooted after all that and it did not install "Installer.app"

ZiPhone 1.1 - Stuck on apple logo after following all steps

ZiPhone 1.2 - Stuck on apple logo after following all steps

ZiPhone 2.0 - Stuck on apple logo after following all steps

Recovery mode and restore through iTunes is the only way to fix the stuck apple logo for me.

Any help?

OOB 1.1.2, restored 1.1.3 (Mac, iTunes 7.6, 10.5.1)

iPhone in recovery Mode, iTunes not running, ZiPhone v2.0:

./ziphone -a -j

Loading zibri.dat.
i386
Searching for iPhone...
Working...
Please wait 45".

Have only the Apple Logo since 30 Minutes...

Phone reboots every 10 minutes or so, but only Apple Logo... No reaction on shutdown-button. Do I have to wait since battery goes low?

I really underestimated you.. sorry :) Donated, also .. for people who are stuck at the Apple log, this works. :)

stuck at the apple logo also here!
thanks but i will use other methods!

works 50% of the time

Anybody tried the -b option?
I hope itll work?

@zibri, thanks

so, to put things straight, I can upgrade to 1.1.3 using itunes (Im on 1.1.1 / 3.9BL), fire up ziphone with the right parameters and I end up with a working iphone with all the bells and whistles of 1.1.3 and no soft update crap needed right?

If anySIM was leaked and it not working properly then how safe is to upgrade my 3.9BL phone to 1.1.3 with baseband 4.3.13 and use Ziphone? :)
I think it isn't safe enough to try :)

who can explain fact, that in my phone 1.1.3 BB 4.2.13 works function locate me in google maps. I have never installed Locate me or navizone in my phone, but Locate me in Maps is working :P some kind of miracle? or it is normal?

NOTE:

- Everyone is asked to use the -v switch for a successful finish.

- YouTube is 100% working.

- iTunes 7.5 ONLY is a must, if you are on 7.6 you MUST do a clean uninstall.

- ZiPhone 2.0 works 100% on iPhones with 3.9BL and 4.6BL

- Using the Verbose mode 10 phones have successfully downgrade the BL from 4.6 to 3.9.

STRONGLY RECOMMEND: Not to use the default GUI or any 3rd party GUI available for the ZiPhone. Command line method is the best!

hi zibri, first of all thanks a lot, i've managed to restore the pfone funtionality to an iphone that's been paperweight for 5 months.

i still have no wifi and an imei 0049.

imei changer is unactive in the gui and it doesn't seem to work in windows cmd.

i'm writing the following in the ziphone folder in cmd:
ziphone -i 1234567890 (my real imei instead of that of course)

but it seems to do nothing and imei remains 0049.

is it just me or imei changer unactive for everybody. i've tried in 2 different computers and i've succesfully used jailbreak, activate and unlock functions of the ziphone.

can you help me please?

I restored my iphone 1.1.1 (1.0.2 OTB, 3.9 BL ) to 1.1.3 and used ziphone1.2 to unlock. Anysim 1.3 would not work since it comes up with the error saying your phone needs to be set to Autolock Never.
Should I go back and restore using Itunes again and RUn Ziphone 2.0. What should I check- A, J, U?, and the other two options i am not sure about.
Please Advice!!!

IMEI must be 16 digits long.
Your shown imei is 15
put a 0 before the imei.

I just tryed to unlock my Iphone with the new version 2.0. Now my phone stucks at the apple Logo. There is no communication to the PC any more. What can I do now to solve the problem?

ok now it worked! I used the command line and -v -b

no longer stuck at the apple logo!

gui version stinks

Since today, there is no "Z for Zorro!"..it's "Z for Zibri". Hihi. :)
Keep up the good work.

Greetings from Germany.

P.s
People who stuck at the Apple logo use the fucking "-v"/Verbose Boot (debug) Option. The 10000. time...

*****Fix for all you guys***

Alright i think a lot of you guys are having problems installing this jailbreak, because you are not puting the phone into proper recovery mode.

You need to have the iphone recognized by itunes, undock the phone, power down the phone (slide to power off), wait a sec, hold down the home button and while the home button is held down, re-dock the iphone, then run ziphone...

Also, only -j is needed for ATT customers..

Thanks Zibri..

On my Mac, somehow running ziphone -a -j -u doesn't work. I waited a long time. But if I ran, ziphone -a -j -u -v, it worked fine.

My phone was OTB 1.1.1 and updated to 1.1.3.

Hello, I need help!!!!! I have a OTB 1.1.2 Iphone. I had it with *sim and worked perfectly.
Today I went from 1.1.2 to 1.1.3 using Itunes 7.6 and then used ziphone. Now my Iphone has no Wifi (Wifi option greyed out), no bluetooth, and when the phone is on sleep it doesn´t ring. Also big battery drain. Any ideas how to fix this? Maybe downgrade bootloader to 3.9 and then virginize? Please Help.

Amazing job Zibri, Thanks!

So...just to be clear...i have 1.1.2. otb and jailbreaked on 1.1.2 ith xsim...using for a while now..with the new ziphone 2.0 i dont need to go in recovery mode it will do it automaticly? just dock the phone, leave itunes opened (7.6 or 7.5?) and do the ziphone -v -u? is that it? or should i put it in recovery?

Hi in my blog have information about you iPhone

www.macvisions.net

You are great! the best Zibri

Ok, just to be clear...with the new ziphone 2.0 i dont have to enter recovery mode, it does it automaticly? so i just dock up the iphone leave itunes opened (should there be 7.6 or 7.5) and go to cmd and type ziphone -v -u ..(i just want to unlock it...i already have it jailbroaken and been using it for a while now with xsim)

it worked with me on 3.9 BL OTB 1.1.1

used this command:
ziphone -u -v

and its up and running :D

thanks alot zibri!

WORKED ! PREFECT !

( this was the 7th iPhone that i upgraded it to 1.1.3 in last 48h ... all Jailbreaked/Activated with ZiPhone ! )

all i've done ...

1.0.2 OTB ! ( 3.9 BL )
Restore 1.1.3 ( iTunes 7.4 )
ZiPhone -j -a -u --> Stuck on Apple Logo ( v2.0 )
ZiPhone -v -j -a -u --> Worked !

now i'll test it on another 3.9BL ... this time a 1.1.1 OTB


@zibri

Why dont you fix this issue ? :D i think you know whats going on when we freeze on that beautiful logo ... because you add "-v" and it can fix the bug ... so why dont you fix the main script ... ?

TUTORIAL: How to unlock a 1.1.3 OOTB BL4.6 iPhone on the Mac.


1. Download ZiPhone.zip v2.0.

2. Extract zip-file into a folder.

3. Open the Terminal-application, enter cd, drag the folder where you unzipped ZiPhone from the finder into terminal - the folder name should appear behind the cd typed in before. Hit return.

4. Connect your iPhone to the Mac, wait until iTunes has been started - and quit iTunes.

5. Enter ./ziphone -j -a -v and return. DON'T FORGET THE -v OPTION, AS IT SEEMS TO CURE THE APPLE-PROBLEM!

6. After restarting you should see messages rolling thru on the screen of your phone. After appr. 40 seconds the iPhone reboots - and is activated and jailbroken.

7a. To unlock the iPhone WITHOUT downgrading the bootloader to 3.9 enter ./ziphone -u -v. After ziphone has displayed some messages, the iPhone's screen starts to show messages rolling thru. After appr. 2 minutes the iPhone reboots - and is unlocked. Because the bootloader is still 4.6, the modem firmware has been downgraded to 04.02.13_G - so Locate-me is not working.

7b. To downgrade the bootloader to 3.9, enter ./ziphone -b -v. After ZiPhone has displayed some messages, the iPhone's screen starts to display messages rolling thru. After around 2 minutes, the iPhone reboots and the bootloader is downgraded to 3.9, the phone is unlocked similar to AnySIM 1.3.

If you are stuck with a 1.1.1- or 1.1.2-phone - or a phone which only displays the Apple after boot, bring the phone into restore mode (switching the phone off - and on again while holding the home button) and restore it to 1.1.3 using iTunes. Don't worry about the 04.03.13_G modem firmware, ZiPhone will taking care of it. After the iPhone has been restored, start with step 1.

I was able to jailbreak, activate, unlock and downgrade BL/unlock a 1.1.3 OOTB 16-GByte iPhone i bought last Sunday.

@Zibri: Chappeau! Great work!!!

cu/

Sergeij

It's not working for me on a PPC Powerbook/10.4.7. Does 2.0 need to be recompiled for PPC and 10.4?

Loading zibri.dat.
ppc
Searching for iPhone...
dyld: lazy symbol binding failed: Symbol not found: _sleep$UNIX2003
Referenced from: /Users/thomas/Downloads/ZiPhone/./ziphone
Expected in: /usr/lib/libSystem.B.dylib

dyld: Symbol not found: _sleep$UNIX2003
Referenced from: /Users/thomas/Downloads/ZiPhone/./ziphone
Expected in: /usr/lib/libSystem.B.dylib

Trace/BPT trap

I am a Mac user. I don't understand why must be iTunes 7.5. Shouldn't iTunes is closed when we run the command line options? Does this matter?

I tried twice on my OTB 1.1.2 iPhone with iTunes 7.6 and OSX 10.5.2, and ziphone 1.2 worked every time. I haven't tried ZiPhone 2.0 yet. There are people saying ZiPhone failed and iTunes may be the reason. Is this true?

Anyway, thanks a lot Zibri. Great job. I am going to donate some.

just a simple question. why would you want to downgrade your bootloader?

New messias has finally arrived
Thanks!
Works!!!!!!!!!!!!!!!!

DId i say thank you?
Thank yoU!!!

You Rooocckkk!
WOOOOWWW
My own personal jeses!
Tom

oh my.. you're getting there.. the new Dark_Alex for the iPhone!

zibri you're the man, i've successfully jailbroken, activated, unlocked and changed my imei. if you could find a way to fix the wi-fi and the bluetooth i'll be forever in your debt.

one thing i've noticed is that when the script is running it tells me i have a wrong bootloader. maybe that's the problem. i've got bootloader 3.9 with some other letters, i'm not sure wich they are. are there different versions of bootloader 3.9? mine is originally firmware 1.0.2. lost wifi and phone when upgrrading to version 1.1 after virginizing. this is the fisrst method in wich i can unlock my phone again.

hope you have soe thoughts on how to get wi-fi back.

there's a lot of people in the same situation as i whou would be very grateful if you come up with a solution.

zibri you rock! hope that you can save us.

if not i'm really glad i have a phone wich is also an ipod.

Success report from Belgium.

I was running 1.1.1 BL 3.9.
I let iTunes do an upgrade to 1.1.3 (after the upgrade, I restarted my phone).
Then ran the GUI with options: unlock + unlock + jailbreak + verbose.
After about 2 mins, the phone was up and running again.

Thx a million (will donate right now).

Whooooooooooooot!!!

what is ziphone -v-b, lease help!!!

Hello i jailbreak and unlocked my iphone, but don't have accept to the folders in iphone, neither iphonebrowser, neither total commander. Messege "Iphone connected, not jailbroken"

I just removed the AT&T aim and performed the ziphone -a -j -u -v and it did not work ... I put the sim back and ran it again, it worked!

so SIM CARD HAS TO BE IN THE PHONE for it to work!

why downgrade to 3.9?
what is the advantage of that?

This comment has been removed by the author.

If you had problems with the Apple logo try this.

I had the same problem in my phone when i upgraded the first time. I was stuck in the Apple logo. After i got the apple logo in the screen forever i then restores the phone again to v.1.1.3 using itunes 7.6 (no option key), the i ran the ziphone again but this time i ran it includng the -v option. The command i used was "./ziphone -a -j -v" and the process works fine.

I was using Mac, iTunes 7.6 and BL 3.9.

I know there are a lot of problems out there but mi problem must be simple to you Zibri. I have used your aplication on my US OTB 1.1.2 and now I have an activated, unlocked and jailbreaked 1.1.3 iPhone but with NO WIFI and NO BLUETOOTH.
PLEASE is my iPhone DEAD? What could I do?.
Thanks a lot...

For everyone still stuck at the Apple logo screen with Bootloader 3.9:

1. Run the "ziphone" command
2. Make sure iTunes is open and undock your phone.
3. "Slide to power off" your phone, when it turns off keep the Home button pressed.
4. Once the loading icon is gone plug the phone back in, keep the home button pressed until you see the restore mode images.
5. Run the command "ziphone -v -j" if you are a registered carrier customer (AT&T, Orange, etc.), "ziphone -v -j -a -u" if you need to unlock.
6. Enjoy 1.1.3 jailbroken. =]

Wow, the man in the picture is Athahualpa? Good job there.
And congrats on the Ziphone 2.
See? Since GeoHot and you joined forces, everything's been nice for us iPhoners.

Zibri,

Many of us have fucked up their iPhone in an attempt to downgrade from 1.1.3 and lost Wifi and BT connectivity.

With your glorious tool I was at least able to restore the GSM phone capabilities (1.1.3, BL 3.9 -> ziphone -a -j -u -v), but Wifi and BT are both still not working.

Perhaps you could spent some additional resources on adding a general Wifi/BT fixer into ziphone. I guess many of us would happily donate.

Game Over?

Hey hey, u still havnt added AFC2 support!

C'on Zibrii!

Please

I upgraded to v1.1.3 via the itunes store and then ran ziphone 2.0 but got this from the command line;

searching for iphone...
USBMuxListernetCreate: No error

then it doesn't do anything i waited a while but still nothing, what am i missing?

HI! making the unlock with Ziphone i rest BLOCKED on Apple,
I try restore already 3 times in DFU mode, and not working, please help!

Zibri,
is there any change you will add a method to upgrade bootloader from 3.9 to 4.6?

Thank you, and have a great day.

Why would you ever need -i ?

Anybody else getting "terminate called after throwing an instance of 'char const*'"
right after "entering recovery mode"?

zibri,
I updated by iTunes original 1.0.2 to 1.1.3, NOT restore. Do you think Ziphone 2.0 will work anyway? Thanks in advance.

Inac

Reporting success activation+jailbreak from venezuela on a 1.1.3 otb with 16gb using ziphone -v -a -j Thanx a lot to geohot and zibri and all others.

The issues i've found is that i have no wifi, when i try to connect to a network it just says "unable to connect to a network".

If someone knows how to solve this issue please share your knoledge =)

Zibri,

first if all thank you for the great job u've done. Don't listen to all that "la-bla Zibri is bad" tuff. U made the best tool for freeing iPhones, so nvm :)

now some questions:

1) Is it possible to revert BL downgrade? I mean if someday we want to come back to 4.6 or newer.

2) I -j -a -u 1.1.3 and all worked fine, except some folders don't have 777 rights. I understand that it is because Applications don't have root rights now, but how to fix it? I can't chmod every single folder :( Or maybe fixed in Ziphone 2.0?

3) If i run ziphone 2.0 -b -v ailbroken activated unlocked 1.1.3 with already installed applications, what would i get?

Thank U! Keep up the best work!

again, for all people who gets stuck on apple logo

try to do

./ziphone -v

has helped on all phones that got stuck for me

seems to clear sound issues too

m

It worked! I've been trying since last night! Here is how it finally worked.

I used Mac osx 10.5.1
Itunes 7.6

Backed up from 1.1.1 in Itunes

Restored using Itunes to version 1.1.3

used ziphone 2.0

ran terminal

and used ziphone -v -j -a -u

I think the key was the -v before that I tried all other combinations and nothing...

Thanks! I'm now going to the donation page!

I have a problem here on my OTB 113 16g, not being able to restore to 113 (error:1011), no imei...
When data (with -v marked in ziphone) scrolls on the screen it say something like: (reading eprom) invalid calibration data in device tree, followed by checksum 0x1A, and then comment 'HM, that's not good', and then I get 'attempt' scrolling all over...
iPhone always gets disconnected 20-30secs after starting ziphone..

Any help, please?

i had a lot of problems with the ziphone gui (the first with gui coz nobody could know that you release the 2nd version so fast...) i get stuck at the apple logo and notheing happend... with 2 phones both with 1.1.1 3.9 after i tried the command line everything work's fine.. -a -j (and -u with 3rd party anysim 1.3) :)

now i have 2 phones with 4.03 BB google locate works fine no problems until yet... greetz from berlin

PLEASE
HOW DO I FIND OUT WHAT VERSION BOOTLOADER IS ON MY IPHONE?

ZIBRI )))

after your 1.2 version of ZIPHONE we have not enough rights to access filesystem!!!!!!

FOR EXAMPLE, shoot foto - doesn't save at all!

this is corrected by modifying Services.plist in 1.1.3


Did you correct this problem in 2.0 ver?

Same question as kozy:

- some folders don't have 777 rights. I understand that it is because Applications don't have root rights now, but how to fix it?

Is this fixed in v2.0?
If not, please DO! :)

For example: Notes are not saving.
I write a note, click Done, but when i go back there is NO note!

This is just one example i can think of in this moment, but i'm sure i've come to some more.

How does the IMEI Change work? It won't work on mine. Please help!

ZIBRI )) thanks


BUT!

in 1.2 version your ziphone breaks the root access to filesystem.

for example, you can't save the photos you shoot with the camera ((((

i had to obtain a modified Services.plist for 1.1.3 to restore working environment.


Please, check this out!








_

for those encountering the dylib error on OSX, this is likely a result of the fact that the provided ziphone binary is compiled for 10.5, and you are trying to run it on 10.4.

One solution (if you have Xcode installed) is to rebuild it yourself from source. Oh, and you'll also need subversion installed to get the source :/

Here's what worked for me...

Check out the source with subversion:

svn co http://iphone-elite.googlecode.com/svn/trunk/ZiPhone/

cd ZiPhone

make -f Makefile.osx ppc

And then using the resulting ziphone.ppc binary.

Replace ppc with i386 if you are on Intel.

Zibri,
You rock!!!
I just donated.
What are you going to do with all this money? I guess buy more iPhones right?
Anyone that has had problems with YouTube, I found a fix to that issue (Cannot connect to YouTube). e-mail me and I'll be glad to help. aaquijano at gmail dot com

Man, you are The Guy!
I think you're gonna receive a personal invite from Jobs to work at Apple (please do not accetp!!!!!!!)

;)

hey guys anybody know the finland number template? the hackintosh site seems to be down so i can't search it. anybody know what the format should look like for finland? thanks.

can't access non-gui version and iphone can't recognize computer or do restore so -v won't work...please help!!!

@anybody stuck at the apple logo.
Stop ziPhone hold the home and lock buttons until you get the usb > itunes logo.

Start ziPhone again and it will unlock just fine

Worked flawlessly on a 1.1.2 softupgraded to 1.1.3 with 3.9 bootloader.
Locate function works perfectly now - thanks for all your hard work. Donation made!

the link for the mac osx source is broken, should it be http://iphone-elite.googlecode.com/svn/trunk/ZiPhoneOSX/
instead of
http://iphone-elite.googlecode.com/svn/trunk/ZiPhone/ZiPhoneOSX/
??

As mentioned above:

On my intel mac mini running Leopard 10.5.2, I'm getting this error:

Entering recovery mode.
terminate called after throwing an instance of 'char const*'
Abort trap


Rebooting fixes the problem. Really odd...

After running ZiPhone 2.0 on OSX 10.5 with a 1.1.1 Iphone, I am no longer able to connect to T-mobile. I have only one bar for signal strength and it does not show the name 'TMobile' at the top like it used to and I cannot make any calls. Any suggestions? Thank you.

stuck on logo.. do I have to run ziphone -v with iphone on or off?!?

Hi there,

Finally it worked... but no WIFI ?????!!!!

Please help, iphone with NO WIFI is worst than locked...

Keep up with the good work

Thanks

i tried to downgrade the baseband but i lost wifi capability. i tried to restore to 1.1.1 but i get a 'error: iphone cannot make or receive calls' and i cannot go through the traditional jailbreak/activate process. can you please help me??

I've spend quite some time on the Apple logo issue and I think I know the issue. It's a timing/race issue in the program. For me it does not happen if I use the latest 1.0 version. All other version that automatically enter recovery mode always caused the logo problem. A 2 seconds pause before sending the commands in Stage0 function will help.

Also, there seems to be some nasty interaction with iTunes, at least with 7.6.

you are de best... 3 mints jailbreak, it is god..... tanks

This comment has been removed by the author.
This comment has been removed by the author.

Zibri, if you read this, can you put the AFC2 service into your jailbreak? Without the AFC2 service, you can only write files to the media partition (the regular AFC service limits read/write to the media partition). I didn't check ZiPhone2 yet, but the old version of ZiPhone had this problem.

http://code.google.com/p/independence/

This comment has been removed by the author.

Hi Zibri,
We have the full source code for the front end of your work so far, would you mind sharing the source code for gunlock2 & 3 in the ram disk, what version of ieraser did you use?
and I'd like to thank you here for the contribution you made to the community and add that i'm reli impressed with your knowledge whatever other's say
thank you, serkan

SENSATIONAL!!!!!!!!!!!

IT REALLY WORKS!!!!!!!!!

running 3.9 BL, running 1.1.3 dev team soft upgrade with no baseband upgrade meaning was on 4.02. boss tool reported 3 MB free space on root. i just had bsd, boss prefs, boss tool, and openssh installed. cant say where the space went as the above apps were small. while in winscp, all i could find was that oktoprep may have left a meg or 2. i think the folder was called touchfree. i dont know about others but i prefer to leave folders in their right place rather than creating soft links.

restored to 1.1.3 and tried the ZiPhone 1.1 twice. I could not get past the apple logo. gave up and restored back to 1.1.1.

just my 2 cents, but it would be good to have a better explanation of the options in ZiPhone and have a troubleshooting guide. It appears that many have the problem where the apple logo never goes away.

as mentioned in the 2.0 version, it spoke of using the -v -b option. if one notices this downgrades the bootloader from 4.6 to 3.9. what if the iPhone is already using the 3.9 BL?

comments in ZiPhone 1.2 was also confusing where it said "You can now delete any version of anySIM :)" so for those on 1.1.3 who applied anysim 1.3, what should they do? does ZiPhone 1.2 apply anysim 1.3 automatically or is it using geohots mod for the baseband?

also leads me to wonder if the problem is caused by free space at the root folder?

am now on 1.1.1 and installed boss prefs, boss tool, bsd and wetool - around 50mb left in root. i am curious to know what would happen after removing all apps except for installer, updating to 1.1.3 and then jailbreak with Ziphone. i want to try it again but have spent a lot of time restoring back to 1.1.1.

i might just wait this out until the dust settles.

Zibri,
Just to LET YOU Know, i ran Ziphone 2.0 from cmd line under Vista with commands: Ziphone -v -j -a

And it UNLOCKED,DOWNGRADED BL to 3.9 from 4.6, Jailbroke, and Activated my 1.1.3 OTB 16gb iPHONE. I wasnt looking to have it unlock or downgrade but it seems to be working fine. I used the -v because it kept hanging at the Apple Logo. Might be a Bug u may want to Fix...
xellaphan@optonline.net

Zibri,
Just to LET YOU Know, i ran Ziphone 2.0 from cmd line under Vista with commands: Ziphone -v -j -a

And it UNLOCKED,DOWNGRADED BL to 3.9 from 4.6, Jailbroke, and Activated my 1.1.3 OTB 16gb iPHONE. I wasnt looking to have it unlock or downgrade but it seems to be working fine. I used the -v because it kept hanging at the Apple Logo. Might be a Bug u may want to Fix...
xellaphan@optonline.net

Public answer to geohot post in his blog:

@ George Hotz

That's ENOUGH !

The ramdisk EXPLOIT was MINE !
I found IT.
I talked about it with BGM.

Not the opposite.

You are being lied by many people, George.

And now I understand your latest behaviour.

Drop them !
Drop Musclenerd expecially.

My tool is using many other tools..
Like your exploit is using pieces of our virginizer and Fred_ work you never even mentioned!

About my tool it would not be existing a ZiPhone without my ramdisk exploit!

And nobody else found it.

Period.

P.S.
I apreciate your technical work.
You are just trusting and cooperating with the wrong people.
But I did the same mistake.
I can understand.

Grow up, kid.

Hi Guys,

What am i doing wrong? I unziped the file, put it in a folder, ran terminal app on the mac, wrote cd, drag the folder where I put the file, push return, wrote ./ziphone -v and appears the next:

-bash: ./ziphone: No such file or directory

What am I doing wrong?

Worked great once I got iPhone into a clean 1.1.3 (didn't work on an unclean 1.1.3->1.1.2 and resulted in apple icon, requiring a restore to 1.1.2 then an update to 1.1.3).

Im running the ziphone application and put start and appear this:

ZiPhone v2.0 by Zibri. http://zibree.blogspot.com
Source code available at: http://www.iphone-elite.org

Loading zibri.dat.
i386
Searching for iPhone...
dyld: lazy symbol binding failed: Symbol not found: _sleep$UNIX2003
Referenced from: /Users/Alvaro/a/ziphone.app/Contents/Resources/ziphone
Expected in: /usr/lib/libSystem.B.dylib

dyld: Symbol not found: _sleep$UNIX2003
Referenced from: /Users/Alvaro/a/ziphone.app/Contents/Resources/ziphone
Expected in: /usr/lib/libSystem.B.dylib



ERROR: ziphone returned 5

Whats wrong?

hello zibri, thank you for your nice work and thanks for geohot too, the ziphone 2.0 works great! my iphone are 1.02 original and updated to 1.1.1, i'm uptade via itunes to 1.1.3 and run ziphone but to work I need to check VERBOSE MODE...

after unlock my iphone lost totaly audio, no ringtone and no mp3... it's only a feedback!

if you have any idea to resolve tis, i've tankfull!

I'm Brazilian and all brazilians are thankfull for your work

cheers

wow haha
zibri is getting mad aT george!!!
lol

so the question is... did zibri stole material?? did he stole the xploit??? mmmm...
i dont care i think everyone (including geohot and zibri should care about the sin, not the sinner... i mean the work done not who did it... this is kind of filosofical, because i think its not who does what (i mean ziphone its great news for iphone community), but if zibri really found the ramdisk exploit or not the work has been done and ziphone is creating iphones come back to life with latest baseband and fully unlocked!!!

common guy grow up geohot, grow up zibri...

lets join forces and take iphone unlocking to the next step!!! (1.1.4 and sdk!!! lol)

and hopefully iphone 3g unlock!!! lol


love you guys, really do, made my 400 bucks work like charm in Mexico.





by the way if.... can someone tell me where can i learn or start to do the kind of stuff george hotz, zibri, gray and the dev team do?? (unlock iphones)
i know some programming in c++ and java...




LETS TAKE IPHONE TO THE NEXT LEVEL WITH BARACK OBAMA


YES WE CAN!!! to justice
YES WE CAN!!! to oportunity
YES WE CAN!!! to prosperity
YES WE CAN!!! to heal this nation (and the world)
YES WE CAN!!!
YES WE CAN!!!
YES WE CAN!!!
YES WE CAN!!!
YES WE CAN!!!

YES WE CAN!!! TO IPHONE UNLOCK!!!

and to be prepared guys for the nexts challenges!!!

YES WE CAN!!!!
YES WE CAN!!!!
YES WE CAN!!!!
YES WE CAN!!!!

@patrick and john

I had that issue where there was one bar/no signal.

I had to restore the phone with itunes (newest version of itunes to 1.1.3)

then downgrade the base band then for kicks i restored the phone again then ran the mac program with jailbreak activate verbose and unlock checked off.

After the phone booted back up everything came back to normal, full bars.

Though now it says CAN Rogers Wireless instead of just Rogers Wireless but now I'm at 1.1.3 from a 1.0.2 OTB phone :)

I used Ziphone 2.0 to unlock, jailbreak and activate 2 - 1.1.3 OTTB iphones today. Worked perfectly.

Thanks, Donation on the way.

my phone seems stuck on the wrong modem firmware. 04.03.13_G

everything works - except i cannot configure Edge settings.

When i try to configure any value and move to the next column, it jumps back to the main screen.

i have even tried ziphone -b

«Oldest ‹Older   1 – 200 of 319   Newer› Newest»

Post a Comment